产品详细介绍：

FEATURES:
All gages and sets are traceable to NIST

• Boxes and gages both marked
• Size and serial number laser etched on each piece (M-0 not etched)
• Material: 52100 Bearing Steel
• No sharp edges
• All members 2” long

USES:

• Checking locations
• Measuring hole sizes and depth
• GO & NOGO gaging
• Setting micrometers
• Checking distances between holes

FINISH:

• Each gage is inspected and has an 8 microfinish or better
• Heat treated to a hardness of 60-62 Rockwell C
• All Metric gages with 0.0025mm limit

Item ID	Tolerance Direction	Size Range	No. of Gages	Weight (lbs.)
M0MMP	Plus	0.22mm to 1.50mm	65	1
M0MMM	Minus	0.22mm to 1.50mm	65	1
M01MMP	Plus	0.23mm to 1.51mm	65	1
M01MMM	Minus	0.23mm to 1.51mm	65	1
M1MMP	Plus	1.52mm to 7.70mm	310	10
M1MMM	Minus	1.52mm to 7.70mm	310	10
M11MMP	Plus	1.53mm to 7.71mm	310	10
M11MMM	Minus	1.53mm to 7.71mm	310	10
M2MMP	Plus	7.72mm to 12.70mm	250	25
M2MMM	Minus	7.72mm to 12.70mm	250	25
M21MMP	Plus	7.73mm to 12.71mm	250	25
M21MMM	Minus	7.73mm to 12.71mm	250	25
M3MMP	Plus	12.72mm to 15.30mm	130	24
M3MMM	Minus	12.72mm to 15.30mm	130	24
M31MMP	Plus	12.73mm to 15.31mm	130	24
M31MMM	Minus	12.73mm to 15.31mm	130	24
M4MMP	Plus	15.32mm to 17.80mm	125	30
M4MMM	Minus	15.32mm to 17.80mm	125	30
M41MMP	Plus	15.33mm to 17.81mm	125	30
M41MMM	Minus	15.33mm to 17.81mm	125	30
M5MMP	Plus	17.82mm to 20.36mm	128	38
M5MMM	Minus	17.82mm to 20.36mm	128	38
M51MMP	Plus	17.83mm to 20.37mm	128	38
M51MMM	Minus	17.83mm to 20.37mm	128	38
M6MMP	Plus	20.38mm to 22.04mm	84	32
M6MMM	Minus	20.38mm to 22.04mm	84	32
M61MMP	Plus	20.39mm to 22.05mm	84	32
M61MMM	Minus	20.39mm to 22.05mm	84	32
M7MMP	Plus	22.06mm to 23.72mm	84	37
M7MMM	Minus	22.06mm to 23.72mm	84	37
M71MMP	Plus	22.07mm to 23.73mm	84	37
M71MMM	Minus	22.07mm to 23.73mm	84	37
M8MMP	Plus	23.74mm to 25.40mm	84	41
M8MMM	Minus	23.74mm to 25.40mm	84	41
M81MMP	Plus	23.75mm to 25.41mm	84	41
M81MMM	Minus	23.75mm to 25.41mm	84	41